23-2023-02 Infrared Alarm Wireless Doorbell Kit - 1*Receiver, 1*Remote & 1*Infrared Sensor 23-2023-02 Infrared Alarm Wireless Doorbell Kit - 1*Receiver, 1*Remote & 1*Infrared Sensor AA Electronics > 16 pieces of chord melodies for you to choose, different melodies for different remote controls available, the unit will emit warning tone when an infrared sensor is triggerd.> Melody volume can be adjusted. > Million groups of learning codes, can avoid interference effectively.> Advanced energy saving.> Transmit distance up to 100m.> Indicator light flickers for about 30 seconds when the corresponding infrared sensor is triggered, three indicator lights will keep flashing to remind the user when battery voltage is low.Battery Type > Remote: CR2032 > Receiver: 3*AA / LR6> Infrared sensor: 3*AA / LR6 Function Keys and Operation Instruction > Code learning/clearing: Keep pressing "Function Key 1" for about 3 seconds, the speaker will emit a warning tone "DI" and "Indicator Light 1" will light up, which means the main unit enters into code learning mode. Meanwhile, trigger the corresponding remote control or infrared sensor. If an infrared sensor is learned, the main unit will emit "DIDU" tone after it is successfully learned. If a remote control is learned, the unit will emit corresponding melody after it is successfully learned. It will automatically exit code-learning mode after the successful code learning. The wait time is about 10 seconds every time the unit enters into code learning mode. It will automatically exit code-learning mode when there is a timeout. When using "Function Key 2 /Ringtone" to learn the codes, the procedure is the same as the one above. When selecting a melody for a remote control, please press "Melody Selection" button to choose a melody and then learn it according to code learning method. In power-off status, keep pressing the "Function Key" button whose codes need to be cleared and then power on the unit. The unit will send out "DI" tone after 3 seconds, and after 5 seconds release the key when hearing "DIDU" tone. The codes are successfully cleared. > Melody selection: Each time you press the melody selection button, it will sound the next ringtone automatically. You can use different ringtones for different remote controls. There are 16 melodies for your selection.> Volume adjustment: 3 levels volume switch "High - Medium - Low" order, the maximum volume can be higher than 100dB. Specification > Remote: - Power Supply: CR2032, 3V - Standby Current: < 2µA - Working Current: < 10mA - Transmitting Time: 2.2 seconds per time - Frequency: 433.92 MHz ± 250 KHz - Distance: 80m > Infrared Sensore: - Power Supply: DC 4.5V (1.5V / AA / LR6 * 3) - Standby Current: < 20µA - Working Current: < 12mA - Infrared Distance: ≥ 6.5m - Infrared Angle: ≥ 110o - Transmitting Time: 3 seconds - Transmission Interval: 6 seconds - Frequency: 433.92 MHz ± 250 KHz - Distance: 80m > Receiver (Main Unit): - Power Supply: DC 4.5V (1.5V / AA / LR6 * 3) - Standby Current: < 0.5mA - Working Current: < 400mA (warning tone), < 90mA (melody) - Volume: > 95dB (warning tone), > 82dB (melody) - Frequency: 433.92 MHz ± 250 KHz - Distance: 80m

23-2023-02 Infrared Alarm Wireless Doorbell Kit - 1*Receiver, 1*Remote & 1*Infrared Sensor

SKU: 23-2023-02
In Stock
Add to Wishlist Add to Compare
  • FAST DELIVERY CANADA WIDE

  • 100% ORIGINAL AND QUALITY

  • 3-12 MONTHS GUARANTEE


> 16 pieces of chord melodies for you to choose, different melodies for different remote controls available, the unit will emit warning tone when an infrared sensor is triggerd.
> Melody volume can be adjusted.
> Million groups of learning codes, can avoid interference effectively.
> Advanced energy saving.
> Transmit distance up to 100m.
> Indicator light flickers for about 30 seconds when the corresponding infrared sensor is triggered, three indicator lights will keep flashing to remind the user when battery voltage is low.


Battery Type

> Remote: CR2032
> Receiver: 3*AA / LR6
> Infrared sensor: 3*AA / LR6

Function Keys and Operation Instruction

> Code learning/clearing:

  • Keep pressing "Function Key 1" for about 3 seconds, the speaker will emit a warning tone "DI" and "Indicator Light 1" will light up, which means the main unit enters into code learning mode. Meanwhile, trigger the corresponding remote control or infrared sensor. If an infrared sensor is learned, the main unit will emit "DIDU" tone after it is successfully learned. If a remote control is learned, the unit will emit corresponding melody after it is successfully learned. It will automatically exit code-learning mode after the successful code learning.
  • The wait time is about 10 seconds every time the unit enters into code learning mode. It will automatically exit code-learning mode when there is a timeout.
  • When using "Function Key 2 /Ringtone" to learn the codes, the procedure is the same as the one above.
  • When selecting a melody for a remote control, please press "Melody Selection" button to choose a melody and then learn it according to code learning method.
  • In power-off status, keep pressing the "Function Key" button whose codes need to be cleared and then power on the unit. The unit will send out "DI" tone after 3 seconds, and after 5 seconds release the key when hearing "DIDU" tone. The codes are successfully cleared.

> Melody selection: Each time you press the melody selection button, it will sound the next ringtone automatically. You can use different ringtones for different remote controls. There are 16 melodies for your selection.
> Volume adjustment: 3 levels volume switch "High - Medium - Low" order, the maximum volume can be higher than 100dB.

Specification

> Remote:
- Power Supply: CR2032, 3V
- Standby Current: < 2µA
- Working Current: < 10mA
- Transmitting Time: 2.2 seconds per time
- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m

> Infrared Sensore:
- Power Supply: DC 4.5V (1.5V / AA / LR6 * 3)
- Standby Current: < 20µA
- Working Current: < 12mA
- Infrared Distance: ≥ 6.5m
- Infrared Angle: ≥ 110o
- Transmitting Time: 3 seconds
- Transmission Interval: 6 seconds

- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m

> Receiver (Main Unit):
- Power Supply: DC 4.5V (1.5V / AA / LR6 * 3)
- Standby Current: < 0.5mA
- Working Current: < 400mA (warning tone), < 90mA (melody)
- Volume: > 95dB (warning tone), > 82dB (melody)
- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m


> 16 pieces of chord melodies for you to choose, different melodies for different remote controls available, the unit will emit warning tone when an infrared sensor is triggerd.
> Melody volume can be adjusted.
> Million groups of learning codes, can avoid interference effectively.
> Advanced energy saving.
> Transmit distance up to 100m.
> Indicator light flickers for about 30 seconds when the corresponding infrared sensor is triggered, three indicator lights will keep flashing to remind the user when battery voltage is low.


Battery Type

> Remote: CR2032
> Receiver: 3*AA / LR6
> Infrared sensor: 3*AA / LR6

Function Keys and Operation Instruction

> Code learning/clearing:

  • Keep pressing "Function Key 1" for about 3 seconds, the speaker will emit a warning tone "DI" and "Indicator Light 1" will light up, which means the main unit enters into code learning mode. Meanwhile, trigger the corresponding remote control or infrared sensor. If an infrared sensor is learned, the main unit will emit "DIDU" tone after it is successfully learned. If a remote control is learned, the unit will emit corresponding melody after it is successfully learned. It will automatically exit code-learning mode after the successful code learning.
  • The wait time is about 10 seconds every time the unit enters into code learning mode. It will automatically exit code-learning mode when there is a timeout.
  • When using "Function Key 2 /Ringtone" to learn the codes, the procedure is the same as the one above.
  • When selecting a melody for a remote control, please press "Melody Selection" button to choose a melody and then learn it according to code learning method.
  • In power-off status, keep pressing the "Function Key" button whose codes need to be cleared and then power on the unit. The unit will send out "DI" tone after 3 seconds, and after 5 seconds release the key when hearing "DIDU" tone. The codes are successfully cleared.

> Melody selection: Each time you press the melody selection button, it will sound the next ringtone automatically. You can use different ringtones for different remote controls. There are 16 melodies for your selection.
> Volume adjustment: 3 levels volume switch "High - Medium - Low" order, the maximum volume can be higher than 100dB.

Specification

> Remote:
- Power Supply: CR2032, 3V
- Standby Current: < 2µA
- Working Current: < 10mA
- Transmitting Time: 2.2 seconds per time
- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m

> Infrared Sensore:
- Power Supply: DC 4.5V (1.5V / AA / LR6 * 3)
- Standby Current: < 20µA
- Working Current: < 12mA
- Infrared Distance: ≥ 6.5m
- Infrared Angle: ≥ 110o
- Transmitting Time: 3 seconds
- Transmission Interval: 6 seconds

- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m

> Receiver (Main Unit):
- Power Supply: DC 4.5V (1.5V / AA / LR6 * 3)
- Standby Current: < 0.5mA
- Working Current: < 400mA (warning tone), < 90mA (melody)
- Volume: > 95dB (warning tone), > 82dB (melody)
- Frequency: 433.92 MHz ± 250 KHz
- Distance: 80m

Return & Exchange Policy

1. Returns

We accept returns and exchange within 7 days from the date you received the merchandise with the original receipt or proof of purchase. Merchandises need to be unopened and in the original packaging. If passes 7 days of your purchase, a 20% restocking fee will apply on a refund or an exchange.

Upon receipt of the returned item, we will fully examine it and notify you via email, within a reasonable period of time, whether you are entitled to a return. If you are entitled to a return, we will refund your purchase price and a credit will automatically be applied to your original method of payment.

Only regular priced items may be refunded. Sale items are non-refundable.
To follow-up on the status of your return, please contact us at info@aa-e.com, or (905)-206-0931.

2. Exceptions

Some items are non-refundable and non-exchangeable. These include: Tools, Earphones & Headphones.

3. Shipping

To return the item you purchased, please mail it to:

1350 Matheson Blvd E., Unit 7, 8
Mississauga, Ontario
L4W 4M1, Canada

For all returns sent by mail, including exchanges, shipping fees are yours to pay. Refunds do not include any shipping and handling charges shown on the packaging slip or invoice. Shipping charges for all returns must be prepaid and insured by you. You are responsible for any loss or damage to hardware during shipment. We do not guarantee that we will receive your returned item. Shipping and handling charges are not refundable. Any amounts refunded will not include the cost of shipping of the return.

Your Recently Viewed Products